Rahul Trading Company

Description:-
Gyproc Elite MR (Moisture Resistant) is a one coat gypsum plaster specifically designed to provide protection in wet areas like bathroom, kitchens, basement, garages, balconies, parking podium etc. It provides extra protection with low absorption of moisture in air or from surface giving excellent results in skirting area application with problems arising out of capillary action and efflorescence. It can be directly used over backgrounds like bricks, blocks, RCC etc. and provides a smooth inert, high quality surface to internal walls and ceilings and a durable base for application of decorative finishes.

Features

• Eliminates two-step process of Sand Cement Plaster and POP punning Doesn’t require water curing
• No shrinkage cracks
• Non-combustible (when tested in accordance with BS: 476: part 4:1970), therefore a good form of thermal protection to the building structure.
• The water penetration as per DIN 1048 (1960) with Max of 0.3 ml/min.
• Excellent Capillary
• Water absorption coefficient test method – BS EN 1015-18.
• GRIHA and Greenpro Certified 

Description:-
Gyproc Xpert+ is a stucco gypsum plaster made for applicationon almost all backgrounds, e.g. brickwork, block work or concrete, suitable for application like POP punning (over Sand & Cement Plaster), bull marks, level strips, etc. It has special additives for enhanced setting time helps in controlling the onsite wastages. It provides perfectly lined and leveled surface providing a perfectly flat surface ready for painting.

Features

• Extra whiteness
• Doesn’t require water curing
• No shrinkage cracks
• Non-combustible (when tested in accordance with BS: 476: part 4:1970), therefore a good form of
• thermal protection to the building structure.
• With improved Thermal resistance properties. (Thermal Resistance R = 0.07m²K/W at 13mm thickness)
• GRIHA and Greenpro Certified.

Description:-
The story of Gypsum Plaster started thousands of years ago. The earliest example of usage of gypsum plaster is at the Tomb of Tutankhamun at the Giza Pyramids which was internally lined with gypsum plasters. Today Gyproc’s range of gypsum plaster has replaced sand and cement plaster as the preferred choice for all internal plastering with all leading builders and contractors across India.
Gyproc Plasters offer a full range of specific and multi-purpose solutions for all internal plastering needs and backgrounds. Gyproc plaster products are designed to suit either hand or machine application. Their consistent performance, workability and reliability is assured, thanks to our exacting manufacturing standards, which enable plasterers to maximise productivity and cut product wastage on site.
Saint Gobain Gyproc Elite 100 one coat gypsum plaster with lightweight aggregates is a replacement of traditional sand cement plaster and is suitable for application on most internal surfaces including brick, block and concrete. Gyproc Elite 100 consists of gypsum hemihydrate formulated with special additives to increase workability and control setting characteristics. Light weight aggregates “Perlite” improves the gypsum plaster's coverage, workability, and provides smooth finished surface.

Application Areas:

• Saint Gobain Gyproc Elite 100 / Elite 90 one coat gypsum plaster can be applied on most internal surfaces like Bricks, Blocks & RCC (Concrete) surfaces.

Features & Benefits:

• Class leading coverage of 100/90 Sq mts/MT at 13 mm thickness*.
• Initial setting time of 20 – 25 minutes * providing maximum work time and onsite wastages.
• Two times faster application than conventional sand cement plaster.
• Fire Protection: Elite-100 is non-combustible as per BS 476-Part4.
• Low thermal conductivity (0.25 W/m-K) as compared to Sand Cement Plaster (0.72 W/m-K)  keeps room cooler in summer and warmer in winter; saving in energy cost.

Description:-
Gyproc BOND-it is a bonding agent for Gypsum plaster & Sand cement plaster that enables preparation of Ceiling and wall surfaces (especially RCC surfaces) within 24 hours. Gyproc BOND-it eliminates risk of debonding gypsum plaster or sand cement plaster from ceiling (RCC surface) due to its low suction background and continuously under pressure of gravity. It enables dual benefits of mechanical and chemical bonding, and completely eliminates the labour intensive hacking process and the risk of plaster de-bonding.
Gyproc BOND-it increases pull out strength by 5 times against conventional hacking process. New technology like aluminium formwork shuttering needs products like Gyproc BOND-it to provide adhesion of Gypsum plastering.

Features 

• Dual Bonding Chemical and Mechanical Key
• Single Coat Brush Application
• No Tackiness Required
• Green Colour

Benefits

• 2X More Strength
• 10X Faster Application
• Easy Supervision
• Areas of Application

Application Procedure

• Background Preparation:Surface on which BOND-it application to be done should be clean, dry and free from mold oil or any other agents. Any faults in the structure, particularly those which may lead to moisture penetration, must be rectified. Just before application of BOND-it, prewetting must be done with the help of a brush/roller.
• Mixing:Mix material properly with clean rod to properly distribute solid particles in the solution.
• Application:Use good quality paint brush. The brush should be cleaned with enough water immediately after use. Apply with even distribution of fine aggregates over the surface. Allow it to dry thoroughly for around 24 hours.

Application instructions

Three Easy Steps to Use Gyproc BOND-it

• STEP 1 : Open and stir the contents,Easy Steps to Use Gyproc BOND-it.
• STEP 2 : Apply with a paint brush,Easy Steps to Use Gyproc BOND-it :- 
• STEP 3 : Dry for 24 hrs. Surface ready for plastering.